Oilfield Horizontal Decanter Centrifuge

1 suitability for different will srlling procedure 2 high process capacity 3 good after-sale service

Generals:

This machine has suitability for different will srlling procedure and high process capacity. It can separate out the ultra micro harmful solid-state grains in the mud.At the same time, the transporter blade in this machine is inlaid with hard allioy block that elongates its service life consideradly.

Application:

This machine is used mainly for controlling the density and viscosity of the well drilling liquid,reducing the solid state content,removing harmful solid state or recovering heavy crystal,and performing second recovery in the bottom steam of the cyclone so as to guarantee the super characteristic of the well drilling liquid and heighten the well drilling speed.

Mounting operation&Maintenance:

1 Mount the centrifuger at the top of tank No.3 far away from the sunction port of the mud pump,May make new arrangement according to actual condition.

2 Make regular check on fasteners for any loose condition,and in each lube point for proper lube condition.

3 As for any centifuger not poeratde for along period,should wash the cylinder and transporter.It is only when you are sure than no jam and blockage exist than you may start it.

4 Start the centrifuger,let is idle for 10~15 minutes,when you are sure that the centrifuger is running normally,and start the mud pump.Regulate the mud supply from less to more until it is proper.

5 If the viscosity of well drilling liquid is too high,then increase dilution water to reduce viscosity so as to speed up solid-atate settlement and improve the process capacity of the centrifuger.

Main capability parameter:

	Cylinder r/min	Max process capacity m3/h	Min separate porint  μm	Master motor power kw	Slave motor power
LW455-NY	1800	50	2.5-5	30	5.5
LW500-NY	1800	60	2.5-5	37	7.5
LWG450×1000-NY	2400	50	2.5-5	30	5.5
LW600×1200NY	1600	80	10	45	11

Oilfield Horizontal Decanter Centrifuge